Skip to content
Cavotec to supply the world’s first combined automated mooring and shore power system

Press release -

Cavotec to supply the world’s first combined automated mooring and shore power system

Port systems innovator Cavotec has won a unique order to manufacture fully integrated MoorMaster™ automated mooring and Alternative Maritime Power (AMP) electrical supply systems for two Norled frequent-use ferry berths in western Norway, servicing the world’s first fully battery powered ferries. 

“These are the first systems anywhere in the world that integrate automated mooring and automated shore-to-ship AMP. This project demonstrates Cavotec’s capacity for innovation, and our ability to offer integrated systems that maximise efficiency gains and environmental performance,” says Sofus Gedde-Dahl, Managing Director of Cavotec Norge A/S.

The automated AMP and MoorMaster™ systems will be installed at the Lavik and Oppedal passenger ferry berths, and used by the world’s first fully battery powered, catamaran-hulled ferry, run by Norwegian ferry operator Norled.

The 80m-long vessel will have capacity for around 120 cars and 360 passengers, and will make 17 crossings of the Sognefjord daily. It is scheduled to enter service in 2015.

“The extent of technical innovation and system integration of this project shows how port operations can be made dramatically more sustainable and efficient,” says Sigvald Breivik, Norled Technical Director.

The level of automation in this application is unprecedented. The MoorMaster™ units will be operated by Cavotec hand-held radio remote controls by the ship’s captain from the bridge of the vessel.

The mooring system will signal to the AMP unit when the ship is secure, and a laser sensor will then guide the AMP connector to a hatch in the side of the vessel, connect to the ship’s battery and start charging.

By using MoorMaster™ the ferry’s propeller system can be switched off for nine minutes during each 10-minute boarding process, giving more than sufficient time to connect to the Cavotec AMP system to charge the on-board batteries.

With around 6,000 port calls made annually on the Lavik-Oppedal route, the air quality improvement and fuel cost savings compared to using conventional mooring and power systems is considerable.

This order adds to the growing number of MoorMaster™ applications in Europe, with the technology already in use at ferry terminals in Denmark and a further one in the Netherlands due to enter service in 2014. MoorMaster™ is also in service at bulk and container handling, Ro-Ro and lock applications worldwide.

Cavotec AMP units are helping ports across northern Europe, North America and Asia to comply with increasingly stringent legislation regarding ships emissions.

ENDS

For further details on this press release, please contact Michael Scheepers, Director Investor Relations & Corporate Communications, at michael.scheepers@cavotec.com.

To find out more about Cavotec, visit our website at www.cavotec.com


Related links

Topics

Categories


Cavotec is a global engineering group that manufactures power transmission, distribution and control technologies that form the link between fixed and mobile equipment in the Ports & Maritime, Airports, Mining & Tunnelling and General Industry sectors.


Contacts

Memed Üzel

Memed Üzel

Press contact Chief Commercial Officer +41 91 911 4010

Related content

We connect the future.

Cavotec is a leading cleantech company that designs and delivers connection and electrification solutions that enable the decarbonisation of ports and industrial applications. Backed by more than 40 years of experience, we provide systems that ensure safe, efficient and sustainable operations for a wide variety of customers and applications worldwide.

Cavotec
Via Pioda 14
CH-6900 Lugano
Switzerland